ModemServe Server Configuration
This allows the administrator to define which of the available COM ports or
Modems are to be shared by the clients. A base TCP port can also be defined..


         






    ModemServe Server Status
This shows which client IP's are currently connected to the Server.
                                                                                

   
 ModemServe Client Configuration
This allows selecting which Virtual COM ports will be created on the client PC,   
and the IP address and base TCP port which each Virtual COM port redirects to.
Optionally the COM port on the server which each virtual COM port connects to   
can be defined, or use the default setting to connect to any available COM port.    
                           



 ModemServe Client Configuration - Server Connection Test
This allows you to verify that the client is properly configured to connect
to the ModemServe Server PC, and can communicate with one of the  
modems shared by ModemServe Server.                                                     



    
ModemServe Client logging
This allows viewing or collecting a log of the data passed to and from the modem, including changes
to the baud rate and line settings, AT commands and modem responses, and data stream. It can be
displayed in either ASCII or Hexadecimal format.    These logs can provide debugging information to  
either your own IT staff, or be sent to our support engineers to assist with troubleshooting.                    

For additional information on how ModemServe functions, please refer to the Users Guide