Release Notes Patton 2977 RAS Adapter Driver Version 5.1.1000.0, 1/13/2003 Microsoft Windows 2000 Microsoft Windows XP Professional Microsoft Windows XP Home Software Package PN 107132K rev A CONTENTS Section Description ------------------------------- 1 Introduction 2 Supported Products 3 Driver Update 4 Additional Notes 5 History 1. INTRODUCTION This document describes the device driver that supports the Patton devices listed below. The driver is for use in the Microsoft Windows 2000 and Windows XP environments. 2. SUPPORTED PRODUCTS Patton 2977/PT1 RAS Adapter (Formerly Digi DataFire RAS 24 PT1) Patton 2977/PT2 RAS Adapter (Formerly Digi DataFire RAS 48 PT2) Patton 2977/PE1 RAS Adapter (Formerly Digi DataFire RAS 30 PE1) Patton 2977/PE2 RAS Adapter (Formerly Digi DataFire RAS 60 PE2) Patton 2977/ST RAS Adapter (Formerly Digi DataFire RAS B4U) Patton 2977/U RAS Adapter (Formerly Digi DataFire RAS B4ST) 3. DRIVER UPDATE WINDOWS 2000 ------------ To update a previously-installed Digi device driver to a new Patton device driver, please follow these steps. a. First, run the program padrcln.cmd to remove the existing INF files for the adapter. This ensures that the new driver files will be installed instead of the old driver files. padrcln.cmd is part of the driver software package and can be found in the same directory as the new driver files. b. Next, navigate to the Device Manager and locate the adapter whose device driver is to be updated: o From the Desktop, right-click on "My Computer" o Select "Manage" o In the left-hand side of the Computer Management window, select "Device Manager" Locate the adapter to update: o In the right-hand side of the window, expand the "Network adapters" category. o Right-click on the device to update o Choose "Properties" Begin the upgrade process: o Click the "Driver" tab o Click the "Update Driver..." button o Click "Next >" o Verify that the default option is selected, "Search for a suitable driver for my device (recommended)" o Click "Next >" o Deselect all options o Select the option, "Specify a location" o Click "Next >" o Enter the path to the new driver files and click "OK" o Click "Next >" c. Windows will display a "Digital Signature Not Found" message, explaining that the driver is not signed. Click "Yes" to continue the installation. One may see several of these warnings -- simply click "Yes" for each message to proceed with the upgrade. d. Windows will now install the new device driver for the adapter and its modems. e. Follow any other instructions to complete the installation. f. Click "Finish" to dismiss the Upgrade Device Driver Wizard. g. Repeat steps b. through f. for each device to be upgraded. WINDOWS XP ---------- The Windows XP upgrade process is very similar to the Windows 2000 upgrade process. a. First, run the program padrcln.cmd to remove the existing INF files for the adapter. This ensures that the new driver files will be installed instead of the old driver files. padrcln.cmd is part of the driver software package and can be found in the same directory as the new driver files. b. Next, navigate to the Device Manager and locate the device whose device driver is to be updated: o Open the Start menu o Right-click "My Computer" o Select "Manage" o In the left-hand side of the Computer Management window, select "Device Manager" Locate the adapter to update: o In the right-hand side of the window, expand the "Network adapters" category. o Right-click on the device to update o Choose "Properties" Begin the upgrade process: o Click the "Driver" tab o Click the "Update Driver..." button o Click "Next >" o Verify that the default option is selected, "Search for a suitable driver for my device (recommended)" o Click "Next >" o Deselect all options o Select the option, "Specify a location" o Click "Next >" o Enter the path to the new driver files and click "OK" o Click "Next >" c. Windows will display a dialog indicating that the software has not passed Windows Logo testing. Choose "Continue Anyway" to proceed with the upgrade. One may see several of these warnings -- click "Continue Anyway" for each message to continue the installation. d. Windows will now install the new device driver for the adapter and its modems. e. Follow any other instructions to complete the installation. f. Click "Finish" to dismiss the Upgrade Device Driver Wizard. g. Repeat steps b. through f. for each device to be upgraded. 4. ADDITIONAL NOTES This driver has not been signed by Microsoft WHQL. On-line help is available when you install the product. Additional installation documentation can be found on Patton's Web site, http://www.patton.com. 5. HISTORY Version 5.1.100.0 ----------------- DRIVER Fixed: Driver crashed under heavy load when TAPI issues drop command for a link before the connection for this link has been actually established. Fixed: WHQL PCI non-compliances. Fixed: WHQL NDIS non-compliances FIRMWARE Fixed: Added check for pump before following pump for cts. Fixed: Modified dialstring for isdn to strip all space characters rather than just the ones in the beginning. Fixed: Commited in pump 571D which fixes a v.8 issue with V.92 modems. Fixed: Fixed Caller ID issue of not displaying after ringing stops. Vantive issue 9406. Version 5.0.336.0 ----------------- DRIVER Fixed: If multiple cards are installed on the same machine, the driver would sometimes give them the same card number. Fixed: Several ISDN TAPI calls were failing WHQL tests. Fixed: Several installation problems involving the modems and async ports. FIRMWARE Fixed: The waiting period after the +++ that the timer must go off or else it will not go into escape mode. Fixed: Black box tracing now shows first command after escape sequence. Fixed: Would not allow ati command as first command after the escape sequence. Fixed: Transmit data would lock if NO CARRIER was received during first escape command. Fixed: receive a NO CARRIER response on the non-first command of escape sequence. Change: ATZ command now performs a hardware reset on the dsp. CHANGES Added INS1500 switch type for T1 lines - this will display as INS64 switch type on the ISDN wizard. Added E1 AMI line coding option Version 5.0.327.0 (M1P) ----------------------- This is the first Patton Electronics supplied driver for the CHANGES Removed support for Digi AccelePort Xp, AccelePort RAS, and DataFire SYNC adapters Enhanced co-installer to support the "Update Driver..." functionality available through the Device Manager BUG FIXES None Version 4.0.229.0 (L Release) ----------------------------- BUG FIXES Fixed: DataFire Sync configuration dialog for X.25 does not show up (#8068) Fixed: DataFire Sync bugchecks under HIS 2000 SNA configuration (digisoh.sys) (#7820) Fixed: WanLinks driver doesn't remove keys from SERIALCOMM when uninstalled (#8412) Fixed: The DigiAsyn.sys driver is hanging in an endless loop (#7656) Fixed: AccelePort Xp bugchecks when returning from Standby (random) (#7649) Fixed: Parity error detection failure with AccelePort Xp (#7542) Fixed: Microsoft FAX does not work with AccelePort Xp (#5702) Fixed: Unable to print with AccelePort Xp (#5081) Fixed: Multiple issues with E1/R2 parameter configuration (#7956, #7897) Fixed: The DigiAsyn.sys driver doesn't handle zero length read requests correctly Fixed: Some timed-out writes are being inadvertently completed with STATUS_CANCELLED Fixed: Write timeout does not work when Write Complete When Sent option is enabled Fixed: Dgclean.cmd does not delete DIGIMPS.inf and MDMDGDEN.inf files Fixed: DataFire Sync driver may crash during driver update or uninstall Updated DataFire RAS firmware to M release. Detailed information about firmware enhancements and bugfixes can be found in the DataFire RAS firmware Release Notes. Version 4.0.217.0 (L3P) ----------------------- BUGFIXES Fixed: Caller DID option within Windows 2000 server is not working (#5576) Fixed: E1/R2 GroupB and backward signalling range incorrect (#5653) Fixed: DgUpdate.exe fails with error unable to find specified file (#7203) Fixed: Add Channel Mapping option for DataFire RAS24/48/30/60 CT1 and PRI (#7380) Fixed: Driver does not start when installing L2P from scratch (#7582) Fixed: DeviceIoctls test application causes bugcheck with AccelePort Xp (#7656) Version 4.0.214.0 (L2P) ----------------------- BUGFIXES Fixed problem establishing a fax connection (#7220,#5702) Fixed dgupdate issues (#7203) Fixed multiple Sync2000 issues in preparation for WHQL submission (#6308,#6307,#6306,#6113,#5802,#5783,#5782) Corrected inf issues in preparation for WHQL submission (#6907) Fixed serial printing errors (#5221,#5081) Fixed 15 second delay on ring back for dense modems (#5099) Changed Sync2000 PLX9080 setup to initialize in PCI 2.1 mode. Problem with modem country setting for E1/T1 cards (#5764) DM_BB diagnostic not working on Win2K (#4577) RasAudio diagnostic not working on Win2K (#5303) Port Assist Viewer doesn't display RAS30/60 boards in E1R2 mode (#5071) Port Assist Viewer doesn't show ISDN layer 3 status (#3976) Port Assist Viewer faults when clearing statistics (#2495) Debug information displayed in free build (#5617) Version 4.0.210.0 (L1P) ----------------------- This version was not released to the public.